PatternGBS 3

LOOSE LAY TILE LL FREE 800

 

LL FREE 800 is a loose lay tile product with 5.0mm thickness designed for free access floors.

Its excellent dimensional stability and antistatic property will fit in computer rooms.

TT801TT801 TT802TT802 TT803TT803 TT804TT804 TT805TT805
TT806TT806 TT807TT807 TT808TT808 TT809TT809 TT810TT810

SPECIFICATION

  • Thickness - 5.0mm
  • width x length - 500mm x 500mm
  • 10pcs/box = 2.5m2/box
  • Can be used with Toli Underlay Sheet

Installation

LL can be installed in both Quarter Turn and Monolithic. When you install LL on the free access floor, each tile should be laid to stride over the joint of free access floor panels in the middle. (The joint of LL should not be matched to that of free access floor panels.) When you install LL on the free acess floor panel made of light mortar concrete without the film, TOLI Eco GA Cement should be used as the adhesive. Installation below 5 degrees centigrade should be avoided. When you install LL below 15 degrees centigrade, the joints of tiles should retain a very slight gap as thin as name cards. LL can show the same antistatic performance as our carpet tile (less than 1.0kv in accordance with JIS L 4406 at 23 degrees cetigrade, 25%RH), and therefore it can be another soloution for office & corporate projects. (If higer antistatic property is specifically required, LL FREE 400/LL FREE 500/LL FREE 800 are more recommendable.) The color shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are instlled.

i_hoko_jyu.jpgi_bokatu_c.jpgCustom Sizei_jis_a5705.jpg

 

Contact us for more information